Arduino EEPROM

Introduction

When working with Arduino projects, you'll often need to save data that persists even when the device loses power. The Arduino's built-in EEPROM (Electrically Erasable Programmable Read-Only Memory) provides a simple solution for this need. Unlike RAM, which loses its contents when power is removed, EEPROM retains data even when the Arduino is powered off.

In this tutorial, you'll learn:

What EEPROM is and why it's useful
How to read from and write to EEPROM
How to work with different data types in EEPROM
Best practices for using EEPROM efficiently
Real-world applications of EEPROM in Arduino projects

What is EEPROM?

EEPROM is a type of non-volatile memory built into the microcontroller on your Arduino board. Here are the key characteristics:

Feature	Description
Size	512 bytes to 4KB (depending on Arduino model)
Lifespan	~100,000 write cycles per memory location
Data retention	~10-100 years
Access speed	Slower than RAM, but persistent

Different Arduino boards have different EEPROM capacities:

Arduino Uno, Nano, Mini: 1KB (1024 bytes)
Arduino Mega: 4KB (4096 bytes)
Arduino Leonardo: 1KB (1024 bytes)

The EEPROM Library

Arduino provides a built-in library for EEPROM operations. Let's start by including it:

cpp
#include <EEPROM.h>

Basic EEPROM Operations

Reading from EEPROM

To read a byte from EEPROM, use the EEPROM.read() function:

cpp
#include <EEPROM.h>

void setup() {
  Serial.begin(9600);
  
  // Read a byte from address 0
  byte value = EEPROM.read(0);
  
  Serial.print("Value at address 0: ");
  Serial.println(value);
}

void loop() {
  // Empty
}

Writing to EEPROM

To write a byte to EEPROM, use the EEPROM.write() function:

cpp
#include <EEPROM.h>

void setup() {
  Serial.begin(9600);
  
  // Current value
  byte oldValue = EEPROM.read(0);
  Serial.print("Old value at address 0: ");
  Serial.println(oldValue);
  
  // Write new value
  byte newValue = 42;
  EEPROM.write(0, newValue);
  Serial.print("Wrote value to address 0: ");
  Serial.println(newValue);
  
  // Verify the write
  byte verifiedValue = EEPROM.read(0);
  Serial.print("New value at address 0: ");
  Serial.println(verifiedValue);
}

void loop() {
  // Empty
}

Output:

Old value at address 0: 255 (or whatever was previously stored)
Wrote value to address 0: 42
New value at address 0: 42

Updating EEPROM

The EEPROM.update() function is more efficient than write() because it only writes to EEPROM if the value is different from what's already stored. This helps extend the EEPROM's lifespan:

cpp
#include <EEPROM.h>

void setup() {
  Serial.begin(9600);
  
  byte currentValue = EEPROM.read(0);
  Serial.print("Current value: ");
  Serial.println(currentValue);
  
  // Update with the same value
  EEPROM.update(0, currentValue);
  Serial.println("Updated with same value (no actual write occurred)");
  
  // Update with a different value
  EEPROM.update(0, currentValue + 1);
  Serial.print("Updated with new value: ");
  Serial.println(currentValue + 1);
}

void loop() {
  // Empty
}

Working with Different Data Types

Storing Integers (2 bytes)

EEPROM.read() and EEPROM.write() only work with single bytes (0-255). To store larger values, you need to split them into bytes:

cpp
#include <EEPROM.h>

void setup() {
  Serial.begin(9600);
  
  // Store an integer (16-bit value)
  int valueToStore = 12345;
  
  // Split the int into two bytes
  byte lowByte = valueToStore & 0xFF;
  byte highByte = (valueToStore >> 8) & 0xFF;
  
  // Write the bytes to consecutive EEPROM addresses
  EEPROM.write(0, lowByte);
  EEPROM.write(1, highByte);
  
  Serial.println("Integer stored in EEPROM");
  
  // Read the integer back from EEPROM
  byte readLowByte = EEPROM.read(0);
  byte readHighByte = EEPROM.read(1);
  
  // Combine the bytes back into an integer
  int readValue = (readHighByte << 8) | readLowByte;
  
  Serial.print("Read integer from EEPROM: ");
  Serial.println(readValue);
}

void loop() {
  // Empty
}

Output:

Integer stored in EEPROM
Read integer from EEPROM: 12345

Using EEPROM.put() and EEPROM.get()

For Arduino boards with more recent versions of the EEPROM library, you can use .put() and .get() to store and retrieve variables of any type:

cpp
#include <EEPROM.h>

struct Settings {
  int threshold;
  float calibration;
  bool enableFeature;
};

void setup() {
  Serial.begin(9600);
  
  // Create a settings object
  Settings mySettings = {
    threshold: 500,
    calibration: 1.23,
    enableFeature: true
  };
  
  // Store the entire structure
  EEPROM.put(0, mySettings);
  Serial.println("Settings stored in EEPROM");
  
  // Create an empty object to read into
  Settings retrievedSettings;
  
  // Read the structure from EEPROM
  EEPROM.get(0, retrievedSettings);
  
  // Print the retrieved values
  Serial.println("Retrieved settings:");
  Serial.print("Threshold: ");
  Serial.println(retrievedSettings.threshold);
  Serial.print("Calibration: ");
  Serial.println(retrievedSettings.calibration, 2);
  Serial.print("Feature enabled: ");
  Serial.println(retrievedSettings.enableFeature ? "Yes" : "No");
}

void loop() {
  // Empty
}

Output:

Settings stored in EEPROM
Retrieved settings:
Threshold: 500
Calibration: 1.23
Feature enabled: Yes

Best Practices for EEPROM Usage

1. Address Management

Keep track of which EEPROM addresses are used for what:

cpp
// Constants for EEPROM addresses
const int ADDR_SETTINGS_VERSION = 0;
const int ADDR_BRIGHTNESS = 1;
const int ADDR_THRESHOLD = 2;
const int ADDR_TEMPERATURE_OFFSET = 4; // 2 bytes for a float

2. EEPROM Wear Leveling

Remember that EEPROM has a limited number of write cycles. For values that change frequently, consider implementing wear leveling by rotating through multiple addresses:

cpp
#include <EEPROM.h>

const int NUM_SLOTS = 5;
const int START_ADDR = 0;

int findLatestSlot() {
  byte maxCounter = 0;
  int latestSlot = 0;
  
  for (int i = 0; i < NUM_SLOTS; i++) {
    byte counter = EEPROM.read(START_ADDR + i);
    if (counter > maxCounter) {
      maxCounter = counter;
      latestSlot = i;
    }
  }
  
  return latestSlot;
}

void writeValue(byte value) {
  int latestSlot = findLatestSlot();
  int nextSlot = (latestSlot + 1) % NUM_SLOTS;
  byte counter = EEPROM.read(START_ADDR + latestSlot) + 1;
  
  EEPROM.write(START_ADDR + nextSlot, counter);
  EEPROM.write(START_ADDR + NUM_SLOTS + nextSlot, value);
  
  Serial.print("Wrote value to slot ");
  Serial.println(nextSlot);
}

byte readValue() {
  int latestSlot = findLatestSlot();
  return EEPROM.read(START_ADDR + NUM_SLOTS + latestSlot);
}

void setup() {
  Serial.begin(9600);
  
  // Example usage
  writeValue(42);
  byte value = readValue();
  
  Serial.print("Read value: ");
  Serial.println(value);
}

void loop() {
  // Empty
}

3. Version Control

Include a version number at the beginning of your EEPROM data to handle format changes:

cpp
#include <EEPROM.h>

const byte CURRENT_VERSION = 2;
const int VERSION_ADDR = 0;

void setup() {
  Serial.begin(9600);
  
  // Check if stored data is compatible
  byte storedVersion = EEPROM.read(VERSION_ADDR);
  
  if (storedVersion != CURRENT_VERSION) {
    Serial.println("EEPROM data format has changed. Initializing with defaults.");
    
    // Initialize with defaults for version 2
    EEPROM.write(VERSION_ADDR, CURRENT_VERSION);
    EEPROM.write(1, 128); // Default brightness
    EEPROM.put(2, 25.5f); // Default temperature
    
    Serial.println("Defaults stored.");
  } else {
    Serial.println("EEPROM data format is current.");
  }
  
  // Read stored values
  byte brightness = EEPROM.read(1);
  float temperature;
  EEPROM.get(2, temperature);
  
  Serial.print("Brightness: ");
  Serial.println(brightness);
  Serial.print("Temperature: ");
  Serial.println(temperature);
}

void loop() {
  // Empty
}

Practical Applications

1. Saving Configuration Settings

One of the most common uses of EEPROM is storing user configuration:

cpp
#include <EEPROM.h>

// EEPROM addresses
const int ADDR_BRIGHTNESS = 0;
const int ADDR_MODE = 1;

void saveSettings(byte brightness, byte mode) {
  EEPROM.update(ADDR_BRIGHTNESS, brightness);
  EEPROM.update(ADDR_MODE, mode);
  Serial.println("Settings saved!");
}

void loadSettings(byte &brightness, byte &mode) {
  brightness = EEPROM.read(ADDR_BRIGHTNESS);
  mode = EEPROM.read(ADDR_MODE);
}

void setup() {
  Serial.begin(9600);
  
  byte brightness = 128; // Default
  byte mode = 1; // Default
  
  // Load saved settings
  loadSettings(brightness, mode);
  
  Serial.print("Loaded brightness: ");
  Serial.println(brightness);
  Serial.print("Loaded mode: ");
  Serial.println(mode);
  
  // Simulate changing settings
  brightness = 200;
  mode = 2;
  
  // Save new settings
  saveSettings(brightness, mode);
}

void loop() {
  // Empty
}

2. Usage Counter

Track how many times a device has been powered on:

cpp
#include <EEPROM.h>

const int BOOT_COUNT_ADDR = 0;

void setup() {
  Serial.begin(9600);
  
  // Read the current boot count
  unsigned int bootCount;
  EEPROM.get(BOOT_COUNT_ADDR, bootCount);
  
  // Increment and store the new count
  bootCount++;
  EEPROM.put(BOOT_COUNT_ADDR, bootCount);
  
  Serial.print("Device has been powered on ");
  Serial.print(bootCount);
  Serial.println(" times");
}

void loop() {
  // Empty
}

3. Data Logger with Power Failure Recovery

Use EEPROM to remember the last logged position:

cpp
#include <EEPROM.h>

const int LAST_RECORD_ADDR = 0;
const int DATA_START_ADDR = 2;
const int MAX_RECORDS = 50;

void setup() {
  Serial.begin(9600);
  
  // Read the last saved record index
  int lastRecord;
  EEPROM.get(LAST_RECORD_ADDR, lastRecord);
  
  Serial.print("Last saved record position: ");
  Serial.println(lastRecord);
  
  if (lastRecord >= MAX_RECORDS) {
    // Reset if we've reached the maximum
    lastRecord = 0;
    EEPROM.put(LAST_RECORD_ADDR, lastRecord);
    Serial.println("Maximum records reached, resetting to 0");
  }
  
  // Simulate logging a new sensor reading
  int sensorValue = analogRead(A0);
  int recordAddr = DATA_START_ADDR + (lastRecord * sizeof(int));
  
  EEPROM.put(recordAddr, sensorValue);
  
  // Update the last record position
  lastRecord++;
  EEPROM.put(LAST_RECORD_ADDR, lastRecord);
  
  Serial.print("Saved sensor value: ");
  Serial.println(sensorValue);
  Serial.print("New record position: ");
  Serial.println(lastRecord);
  
  // Print all stored records
  Serial.println("All stored records:");
  for (int i = 0; i < lastRecord; i++) {
    int value;
    EEPROM.get(DATA_START_ADDR + (i * sizeof(int)), value);
    Serial.print("Record ");
    Serial.print(i);
    Serial.print(": ");
    Serial.println(value);
  }
}

void loop() {
  // Empty
}

EEPROM Clear and Management

Sometimes you need to clear or initialize the EEPROM:

cpp
#include <EEPROM.h>

void clearEEPROM() {
  Serial.println("Clearing EEPROM...");
  
  for (int i = 0; i < EEPROM.length(); i++) {
    EEPROM.write(i, 0);
  }
  
  Serial.println("EEPROM cleared!");
}

void setup() {
  Serial.begin(9600);
  
  // Only call this when you want to reset all EEPROM data
  // clearEEPROM();
  
  Serial.println("EEPROM content (first 16 bytes):");
  for (int i = 0; i < 16; i++) {
    byte value = EEPROM.read(i);
    Serial.print(i);
    Serial.print(": ");
    Serial.print(value);
    Serial.print(" (0x");
    if (value < 16) Serial.print("0");
    Serial.print(value, HEX);
    Serial.println(")");
  }
}

void loop() {
  // Empty
}

Summary

EEPROM is a valuable resource in Arduino projects that allows you to:

Store configuration settings that persist when power is lost
Track usage statistics across power cycles
Create data loggers with power failure recovery
Build devices with user-customizable preferences

Remember these key points:

EEPROM has limited write cycles (about 100,000 per address)
Use update() instead of write() when possible
Implement wear leveling for frequently changed values
Include version control for your EEPROM data format
Keep track of which addresses store what data

Exercises

Create a program that uses EEPROM to remember the highest value read from an analog sensor.
Build a simple "favorites" system that stores three user-favorite modes in EEPROM.
Make a program that uses EEPROM to implement a "secret knock" detector that remembers a sequence of knocks.
Create a data logger that stores temperature readings in EEPROM and can be accessed via the Serial Monitor.
Implement a wear-leveled counter that can survive trillions of updates by rotating through the entire EEPROM space.

Additional Resources

If you spot any mistakes on this website, please let me know at [email protected]. I’d greatly appreciate your feedback! :)

Introduction​

What is EEPROM?​

The EEPROM Library​

Basic EEPROM Operations​

Reading from EEPROM​

Writing to EEPROM​

Updating EEPROM​

Working with Different Data Types​

Storing Integers (2 bytes)​

Using EEPROM.put() and EEPROM.get()​

Best Practices for EEPROM Usage​

1. Address Management​

2. EEPROM Wear Leveling​

3. Version Control​

Practical Applications​

1. Saving Configuration Settings​

2. Usage Counter​

3. Data Logger with Power Failure Recovery​

EEPROM Clear and Management​

Summary​

Exercises​

Additional Resources​

Introduction

What is EEPROM?

The EEPROM Library

Basic EEPROM Operations

Reading from EEPROM

Writing to EEPROM

Updating EEPROM

Working with Different Data Types

Storing Integers (2 bytes)

Using EEPROM.put() and EEPROM.get()

Best Practices for EEPROM Usage

1. Address Management

2. EEPROM Wear Leveling

3. Version Control

Practical Applications

1. Saving Configuration Settings

2. Usage Counter

3. Data Logger with Power Failure Recovery

EEPROM Clear and Management

Summary

Exercises

Additional Resources